- Ssd drive for macbook pro mid 2009 install#
- Ssd drive for macbook pro mid 2009 full#
- Ssd drive for macbook pro mid 2009 iso#
- Ssd drive for macbook pro mid 2009 Bluetooth#
VGA output using Mini DisplayPort to VGA Adapter (optional)ĭual-link DVI output using Mini DisplayPort to Dual-Link DVI Adapter supports 30-inch Apple Cinema HD Display (optional) Input
Ssd drive for macbook pro mid 2009 full#
Ssd drive for macbook pro mid 2009 iso#
Meets ENERGY STAR Version 5.0 requirementsĭECLARED NOISE EMISSIONS in accordance with ISO 9296.Highly recyclable aluminum and glass enclosure.MacBook Pro is designed with the following features to reduce its environmental impact: Combined optical digital audio output/audio line out (minijack).Combined optical digital audio input/audio line in (minijack).Built-in omnidirectional microphone (located under left speaker grille).Built-in 10/100/1000BASE-T Gigabit Ethernet (RJ-45 connector).
Ssd drive for macbook pro mid 2009 Bluetooth#
Ssd drive for macbook pro mid 2009 install#
Select the USB drive to boot from and follow instructions to install OS X.Attach the bootable USB installer and restart the MacBook while holding down the Option key.Press the power button and wait a few minutes for it to boot up.For the RAM upgrade, follow Apple’s instructions.Reattach the black arm and tighten down the two screws to hold the SSD in place.Connect the SATA and power cable to the new SSD, and carefully place it where the old hard drive was located.Put those four screws on the new SSD and stick the plastic pull tab on it.Unplug the SATA and power cable from the hard drive, then remove the four screws in the sides of the hard drive with the Torx T6 screwdriver.Remove the black arm, then use the pull tab to carefully lift out the hard drive.Take off the bottom cover and use the Torx T6 screwdriver to loosen the two black screws in the black arm/hinge that holds down the hard drive.I set them down in the same pattern they are installed in the MacBook.
Keep track of where they go because three of them are longer than the others. Use the Phillips #00 screwdriver to remove the 10 screws on the bottom of the MacBook.Don’t just put it to sleep it must be shut down. I used createinstallmedia and a 16GB USB flash drive. Create a bootable USB installation drive.I used an external USB drive and Time Machine to create a backup. Backup any files that you want to keep from the old hard drive.These are the steps I followed (make sure you avoid static discharge when handling the computer internals): I would like to emphasize that you should get a Phillips #00 screwdriver and a Torx T6 screwdriver if you don’t already have them. For the installation process, there are plenty of blogs and tutorials so I won’t go into full details here.